Sl-15, where does the coolant line plug in?? - CNCzone.com-The Largest Machinist Community on the net!

Welcome to the CNCzone.com-The Largest Machinist Community on the net! forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

		CNCzone.com-The Largest Machinist Community on the net! > MetalWorking Machines > Mori lathes
Sl-15, where does the coolant line plug in??

Mori lathes Discuss Mori lathes here.

Thread Tools

Display Modes

03-08-2008, 02:53 PM

viper6383

Join Date: Nov 2006

Location: USA

Posts: 224

Sl-15, where does the coolant line plug in??

Seems a dumb question but we have not used the machine as of yet and just got to looking at the coolant system to get things setup for this spring. You can easily see where the electrical plugs in but all I have on the pump is a barbed fitting. There is one hose in the back of the machine that goes into the turret and has a quick couple connection on it. It is very near the hydraulic system and I thought it might be an auxiliary hydro hose and not coolant.

I do NOT want to make that mistake! Nothing is marked and of course the manual says nothing about it. Can someone clarify? The machine is of the 1990 vintage. thanks

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dm2400 Line By Line Execution????	andrewtub	Benchtop Machines	4	03-15-2009 02:48 PM
Line Smoothing, point /line no identification	dz1	Visual Basic	8	12-15-2007 06:03 AM
DIY coolant system with loc-line - how much pressure?	Eddiep	Benchtop Machines	12	09-07-2007 04:13 PM
CNC kit ?(Plug n' Play)	rhupin	Open Source CNC Machine Designs	4	01-18-2007 02:51 PM
IMservice plug	CNCadmin	CNCzone Club House	0	11-24-2004 01:18 PM

All times are GMT -5. The time now is 02:11 AM.