mori sl-6b tailstock movment - CNCzone.com-The Largest Machinist Community on the net!

Welcome to the CNCzone.com-The Largest Machinist Community on the net! forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

		CNCzone.com-The Largest Machinist Community on the net! > MetalWorking Machines > Mori lathes
mori sl-6b tailstock movment

Mori lathes Discuss Mori lathes here.

Thread Tools

Display Modes

01-10-2008, 04:25 PM

KENNETH BROWN KENNETH BROWN is offline

Join Date: Sep 2007

Location: u.s.a.

Posts: 24

KENNETH BROWN is on a distinguished road

mori sl-6b tailstock movment

i need my tail stock to move in program with the chuck unclamp i want to move it forward advance the quill to center and hold a part while my operator puts shims in the jaws then clamps the part hits cycle start tailstock moves back and cycle runs i dont have any books on this machine so i dont know if there is a parameter i can change, machine has a fanuc 6t control on it

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tailstock won't extend	burnin daylight	General CNC (Mill and Lathe) Control Software (NC)	0	03-19-2007 09:54 PM
tailstock won't extend	burnin daylight	Daewoo/Doosan	0	03-19-2007 04:35 PM
Right pressure for tailstock	jani	General Metalwork Discussion	12	03-05-2007 11:45 AM
tailstock (mis)alignment	ajbarrell	Shopmaster/Shoptask	8	01-06-2007 11:18 PM
TL-2 tailstock	rbest27	Haas Mills	2	11-10-2006 06:20 PM

All times are GMT -5. The time now is 07:12 PM.