Reply with QuoteThis is the website to help you put it all together!
Just post what you need info on, and voila! Someone will explain. Alternatively, have a browse through all the projects in the homemade router section, as there is a load of info in there.
Have parts-next step?
I have gathered the following parts
machine
Xylotex 3-axis board
cooling fan
3- 116 oz nema 23 stepper motors
24 volt power supply
computer and software
Is there any website that gives any step by step instructions to putting this all together.....any help would be most appreciated, just itching to get it all put together ...Jim Stidham
Similar Threads:
- newbie question on step by step cutting setup/ process in Mach3
- Need Help!- Tranlate puls/dir control signals to Step Time, Step Space, Direction Hold (LinuxCNC)
- Need Help!- Loosing step more and more on X axis only after reducing the accl/velocity step motor
- Need Help!- Step/Direction pins should be Step FWD and Step BACK
- Step by step cnc plasma with parts list and links.
This is the website to help you put it all together!
Just post what you need info on, and voila! Someone will explain. Alternatively, have a browse through all the projects in the homemade router section, as there is a load of info in there.
Posting Permissions
