CNCzone.com-The Largest Machinist Community on the net!


Welcome to the CNCzone.com-The Largest Machinist Community on the net! forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Home Page Mark Forums Read Today's Posts My Replies Classifieds Reviews Photo Gallery Web Links Share Files Advertise With Us Ad List
Go Back   CNCzone.com-The Largest Machinist Community on the net! > Machine Controllers Software and Solutions > General CNC (Mill and Lathe) Control Software (NC)
Reload this Page Need Help!- Fanuc 18M - Neverending Issues....!!!
Register Blogs FAQ Donate Calendar Search Today's Posts Mark Forums Read Videos

Notices

General CNC (Mill and Lathe) Control Software (NC) General Discussion of CNC (Mill and Lathe) control software here!


Reply
 
Thread Tools Display Modes
  #1   Ban this user!
Old 03-01-2010, 02:56 PM
Fonzi Fonzi is offline
 
Join Date: Feb 2010
Location: United States
Posts: 5
Fonzi is on a distinguished road
Exclamation Fanuc 18M - Neverending Issues....!!!
After replacing the power supply and having a servo alarm repaired. I now get the following errors on my Mill ( Fanuc 18M system ).

410 - Servo Alarm Z Axis Excess Err
410 - Servo Alarm Y Axis Excess Err
750 - Spindle Serial Link Error
33 - Spindle Alarm

When I reset the system the Y and Z axis harshly jump. And the alarms return.

When I sent in the servo alarm I also sent in the CPU which tested OK.

Any help on where to test would be greatly appreciated.

Thanks.
Reply With Quote

  #2   Ban this user!
Old 03-11-2010, 11:15 AM
Fonzi Fonzi is offline
 
Join Date: Feb 2010
Location: United States
Posts: 5
Fonzi is on a distinguished road
CORRECTION
I mistyped twice.... I meant SERVO AMPLIFIER not servo alarm.
Reply With Quote

Reply

Bookmarks

Tags
18m, 410, 750, al-33, fanuc



« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
smi issues with p4 draughted EMC/Linux (Enhanced Machine Control) 0 10-16-2009 07:11 AM
rs232 issues with a fanuc 6t controller merrittr Fanuc 5 07-31-2008 08:18 AM
Fanuc 2000c Control Issues 69owb Fanuc 4 04-03-2008 10:16 AM
Serial Port Issues with GE Fanuc OT-C keystoneprec Fanuc 7 04-05-2007 09:39 AM
memory issues on fanuc 11m cncwhiz Fanuc 2 10-09-2005 06:12 PM




All times are GMT -5. The time now is 02:30 PM.

Contact Us - CNCzone.com - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
CNCzone,LLC Copyright ©2007,2008