Hi CrazyIvan,
Who was the airline?
We are going by Tiger air. hmmmm a bit wories with them.
Rodney
Mongrels canned my flight... I had to decide between 90 minutes ealier or 90 minutes later.
Since I'm just coming down for the day, I didn't want to miss the entire morning. I'm now on a 6AM flight.
I'll be the guy asleep in the doorway when you get there... please wake me. (Just stepping over me would be most rude!)
Hi CrazyIvan,
Who was the airline?
We are going by Tiger air. hmmmm a bit wories with them.
Rodney
I will still keep trying to fix the printer but it isn't looking good, short of changing the main feed roller and top rollers with something I am out of luck, I have contaminated the rollers by putting some non slip spray (belt grip) on them, now no matter how much I clean them they contaminate the clean copper right before it prints
If I fix it I will bring it but time is running out...
There is a silver lining, I have always wanted to try using linear encoders/sensors from printers to make up a servo based pcb milling/drilling table (small but fast) - I have my first donor linear encoder
Russell.
It has probably been mentioned but will someone be bringing a Wigitmaster machine ?
I would love to check one out in person.
Cheers.
Russell.
Greolt will have his WigitMaster-Midi running the proxxon spindle setup and milling name badges etc... I'II have my WigitMaster-Midi with the Kress spindle setup there too ;-)
Sweet, is it Saturday yet ?
Hi guys not long now.
I have sourced a PA for the day. I will need someone to take charge of setting this up.
I have a video camera that will capture the items been talked about and put it on the big screen. Just tested it and its ok. It has standard video out (Yellow RCA) or Svideo out. What I would like to be able to do, but not necessary is to be able to walk around wirelessly. Has any one got any equipment that could allow this? Could you let me know if you could bring it.
I am thinking with the amount of people on the day, and crowding around the item been talked about, it might be better to display it on the screen.
I need a volunteer to operate the camera on the day. Anyone?
I will be bringing 50 plastic plates and knives and forks. No need to bring your own. Cups of tea and coffee will be provided too. While the cost of this will be sponsored by Image Blinds I will be also leaving out a donation tin on the day. Any excess money will go into a kitty for further events, and or to reimburse those who have paid for any other items. I would like to encourage a small donation, (but not mandatory either) I will leave a donation tin near the coffee.
More notes to happen throughout this week.
Regards Benny
EDIT: A clip board will be floating around the meeting during the day. Please fill in your details when it comes your way. You will be then entitled to be in the draw for any of the prizes been drawn on the day. I will also need a volunteer who can make sure the clipboard circulates to everyone.
Being outside the square !!!
I'll be coming along to the BBQ for sure, a little later than Derek will be arriving, and Allen & also Allen's dad, Gordon, should be making the trip with me.
Cheers
Jay aka ToranaGuy
1. ynneb - Benny
2. Eclipze - Tony
3. FPV_GTp - Ivan
4. Neilw20 - Neil ( until 2:15 PM) - I will have SMALL CARBIDE DRILLS.
5. The President - George
6. Epineh - Russell and +1 but I will let him conf
7. Ron230 - Ron
8. Greolt - Greg
9. Crocky - Bob
10. ClaudioG's brother - Phil (maybe)
11. Rocket from SA
12. phomann - Peter Homann
13. eggo - John Egglestone (maybe 2 attending)
14. mif73 -Andrew, also Wayne and possibly Eric
15. Nigel
16. Mikie
17. cnc_oz - John
18. CrazyIvan - Another Ivan
19. Ben Van Der Linde.
20. jfh2007 - John Hansen.
21. domar-Don Clark
22. Reflow - Scott
23. Rodm1954
24. Bones (Rod)
25. Dr Zoot ... Alan from Moss Vale NSW
26. rodmdx and brother vincent
27. electrokean - Kean (and possibly brother Grant)
28. derekj308 - Derek and Jay and possibly Alan
29. AeroKam (Bruce)
30. Marcus (attending with AeroKam)
31+32 locoau (Frank Clark) and Dave Penney
33+34+35 Rod (Rocket67) Ramon and Frank
36 Matty Zee (Matt) confirmed
37. Chrisjh (Chris Humphris from Brisbane) confirmed
38. BrianT confirmed
39. t.wardrop - Tim confirmed
40. Paul3112 - Paul Treleaven.
41. CC'z - Charles
1. ynneb - Benny
2. Eclipze - Tony
3. FPV_GTp - Ivan
4. Neilw20 - Neil ( until 2:15 PM) - I will have SMALL CARBIDE DRILLS.
5. The President - George
6. Epineh - Russell and +1 but I will let him conf
7. Ron230 - Ron
8. Greolt - Greg
9. Crocky - Bob
10. ClaudioG's brother - Phil (maybe)
11. Rocket from SA
12. phomann - Peter Homann
13. eggo - John Egglestone (maybe 2 attending)
14. mif73 -Andrew, also Wayne and possibly Eric
15. Nigel
16. Mikie
17. cnc_oz - John
18. CrazyIvan - Another Ivan
19. Ben Van Der Linde.
20. jfh2007 - John Hansen.
21. domar-Don Clark
22. Reflow - Scott
23. Rodm1954
24. Bones (Rod)
25. Dr Zoot ... Alan from Moss Vale NSW
26. rodmdx and brother vincent
27. electrokean - Kean (and possibly brother Grant)
28. derekj308 - Derek and Jay and possibly Alan
29. AeroKam (Bruce)
30. Marcus (attending with AeroKam)
31+32 locoau (Frank Clark) and Dave Penney
33+34+35 Rod (Rocket67) Ramon and Frank
36 Matty Zee (Matt) confirmed
37. Chrisjh (Chris Humphris from Brisbane) confirmed
38. BrianT confirmed
39. t.wardrop - Tim confirmed
40. Paul3112 - Paul Treleaven.
41. CC'z - Charles
42. Gyrobuilt- Mark
If anyone could bring a trestle table or two, along, this would be great.
Remember we also need power leads and 4 ways adapter boards.
Thanks.
Being outside the square !!!
[QUOTE=ynneb;453537]Hi guys not long now.
I have sourced a PA for the day. I will need someone to take charge of setting this up.
Regards Benny
Hi Benny and group
Do you have the PA as I can bring one - may not have the radio mics working but the cable mics OK - Do you want? - and I can help set up on the day the above unit if needed.
Regards
Frank
1. ynneb - Benny
2. Eclipze - Tony
3. FPV_GTp - Ivan
4. Neilw20 - Neil ( until 2:15 PM) - I will have SMALL CARBIDE DRILLS.
5. The President - George
6. Epineh - Russell and +1 but I will let him conf
7. Ron230 - Ron
8. Greolt - Greg
9. Crocky - Bob
10. ClaudioG's brother - Phil (maybe)
11. Rocket from SA
12. phomann - Peter Homann
13. eggo - John Egglestone (maybe 2 attending)
14. mif73 -Andrew, also Wayne and possibly Eric
15. Nigel
16. Mikie
17. cnc_oz - John
18. CrazyIvan - Another Ivan
19. Ben Van Der Linde.
20. jfh2007 - John Hansen.
21. domar-Don Clark
22. Reflow - Scott
23. Rodm1954
24. Bones (Rod)
25. Dr Zoot ... Alan from Moss Vale NSW
26. rodmdx and brother vincent
27. electrokean - Kean (and possibly brother Grant)
28. derekj308 - Derek and Jay and possibly Alan
29. AeroKam (Bruce)
30. Marcus (attending with AeroKam)
31+32 locoau (Frank Clark) and Dave Penney
33+34+35 Rod (Rocket67) Ramon and Frank
36 Matty Zee (Matt) confirmed
37. Chrisjh (Chris Humphris from Brisbane) confirmed
38. BrianT confirmed
39. t.wardrop - Tim confirmed
40. Paul3112 - Paul Treleaven.
41. CC'z - Charles
42. Andrewver - Andrew V
Hi all, i have been reading the posts for several months now and have gathered a lot of useful info for my first machine. but just when i think i am finished something else turns up and i have it apart again!
Look forward to meeting you all
Andrewver