ATC UPGRADE FOR SHOPSABRE 4896


Results 1 to 2 of 2

Thread: ATC UPGRADE FOR SHOPSABRE 4896

  1. #1
    Registered
    Join Date
    Apr 2014
    Posts
    2
    Downloads
    0
    Uploads
    0

    Angry ATC UPGRADE FOR SHOPSABRE 4896

    Has anyone recently installed an ATC upgrade from ShopSabre?
    What issues did you encounter? I'm currently nearing the end of the project, and after more than 4 weeks downtime I'm at my wit's end!
    Not to mention, my company's hemorrhaging money from the downtime!

    Similar Threads:


  2. #2
    Registered ken rychlik's Avatar
    Join Date
    Sep 2010
    Location
    united states
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: ATC UPGRADE FOR SHOPSABRE 4896

    I installed my own, but I would not be afraid of their upgrade. I wanted top load and my tools laid out my way. It's not for the faint at heart and if time is of importance, get theirs. A friend of mine has one of theirs with a factory atc and the side load always chewed up the dust skirt.

    They will say you need a gantry lift, but I am doing fine without one. I still have 6 inches over the spoilboard. I cut out the table in select spots and the tool holders are set lower than what they do.

    Not having atc should not put you dead in the water. Your current spindle dead?

    Ken



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ATC UPGRADE FOR SHOPSABRE 4896

ATC UPGRADE FOR SHOPSABRE 4896