| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Shopmaster/Shoptask Discuss Shopmaster/Shoptask machinery here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-14-2007, 09:05 PM
| ||||
| ||||
Hi everyone, So I checked the runout on my mill splindle today and I'm getting a little under .001 at one inch from the collet. Has anyone else checked this? I guess it's *okay* but I was hoping for better. I'm using lyndex collets which are supposed to be ground to--.0002 I think. Reason I ask is that I was considering a R8/ER40 collet holder, but this will put the tool a lot further from the spindle, and I presume will have even greater runout as a result of the distance. Anyone else have data?    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| tools sticking in spindle, excessive runout | stustev | Haas Mills | 17 | 04-02-2007 02:40 PM |
| Low runout, small hole drilling | rpawluc | General Metal Working Machines | 0 | 01-01-2007 06:23 PM |
| How much spindle runout is acceptable? | sbalder | General Metalwork Discussion | 6 | 12-13-2006 10:11 PM |
| Endmill runout | dberndt | General Metalwork Discussion | 14 | 01-28-2005 12:26 AM |
| Runout | grantmi1 | Hard and High Speed Machining | 6 | 06-12-2003 04:22 PM |
| | |
Linear Mode
