Results 1 to 3 of 3

Thread: Sheetcam tutorials.

  1. #1
    Moderator ynneb's Avatar
    Join Date
    Feb 2004
    Location
    Oz
    Posts
    2337
    Downloads
    0
    Uploads
    0

    Default Sheetcam tutorials.

    New SheetCam tutorials have been posted.
    If you prefere to save the PDF files just right click on them and select save target as.
    The help file is 64 pages and may take a while to open.


    Help File

    Tutorial 1


    Tutorial 2


    Similar Threads:
    Last edited by ynneb; 03-16-2005 at 05:52 AM.
    Being outside the square !!!


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Twp, MI....USA
    Posts
    24483
    Downloads
    0
    Uploads
    0

    Default

    A little side note for anyone not aware of this. PDF files can be downloaded and opened much faster than opening in a browser. Usually by a factor of 10 or more. With a broadband connection, pdf's that may take what seems like several minutes to open in a browser can usually be downloaded in a few seconds.

    Gerry

    Mach3 2010 Screenset
    http://home.comcast.net/~cncwoodworker/2010.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered The Wizard's Avatar
    Join Date
    Aug 2004
    Location
    Canada
    Posts
    117
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by ger21
    A little side note for anyone not aware of this. PDF files can be downloaded and opened much faster than opening in a browser. Usually by a factor of 10 or more. With a broadband connection, pdf's that may take what seems like several minutes to open in a browser can usually be downloaded in a few seconds.
    I recently downloaded and installed a little 'widget' that reduces the time required to open Acrobat as it only loads the 'plug-ins' required for viewing files. I am very impressed with it so far and it is a simple click to turn on and the same to turn off if you want full access to Acrobat's other features. The time difference is quite staggering and Acrobat now opens in the blink of an eye (ok maybe two ).

    It can be found at the link below under the 'Adobe Reader Speed-up' heading.

    http://www.tnk-bootblock.co.uk/prods/misc/

    Larry



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed