| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| SheetCam Discuss SheetCam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-24-2007, 03:57 AM
| |||
| |||
| I need some help. I am buildiing a plasma cutter but have problems with the cam software. I am working with sheetcam but have problems importing the g code program to Mach3. Sheetcam has got a G23 code which Mach does not recognize. Is there some setting that must be changed for these programs to interact with each other?    |
|
#3
05-25-2007, 01:34 AM
| |||
| |||
| Just a slight addendum, if you are using plasma without THC then you want the Mach2 plasma post otherwise you should have received a post for the THC. |
|
#4
05-27-2007, 09:34 AM
| |||
| |||
| my solution hi scott, you can try out Campbell Designs' Mach 3 plasma system, go over to www.campbelldesigns.com, select for thc mach3, download the mach 3 files and try it out, it works very well for me xD |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| problem with my z axis on mach3 | thesaent14 | Machines running Mach Software | 18 | 04-06-2007 06:28 PM |
| Mach2/Mach3 installation problem (laptop) | xyz100 | Mach Software (ArtSoft software) | 3 | 07-25-2006 09:56 AM |
| Mach3 converting dxf files problem | randyf1965 | DIY-CNC Router Table Machines | 7 | 04-19-2006 12:28 AM |
| Mach3 limit switch problem on Ref Home | originator | Mach Software (ArtSoft software) | 1 | 03-13-2006 09:02 AM |
| Mach3 Mill Pausing Problem | Lionclaw | Mach Mill | 6 | 11-14-2005 01:05 PM |
| | |
Linear Mode
