I have CandCNC's latest MP3000 DTHC.
I also have the latest version of SheetCAM TNG.
I can import DXF drawings, do all the things that need to be done and create
a cutting program.
When I run the program with Mach3, the torch raises up some, rapids to starting point, travels downs, touches off, comes up to pierce height, fires then after a slight pause the machine starts traveling and then the torch starts going down until it touches the plate again (you can imagine what happens to the nozzle), then it will come back up to the cut height.
I use the MP3000 post processor that came with my system CD.
Does anyone have any suggestions on what I could check or change?
Thanks in advance for the help.
Use any of the MP1000 or MP3000 named Posts that come WITH SheetCAM TNG. Old posts (.post extension) do not work with TNG (scpost estention)