| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Sharp CNC Discuss Sharp CNC Machines Here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-27-2008, 01:54 PM
| |||
| |||
 sharp sv-2412 Hello folks! I'm new to this kind of communication, but will give it a try. We have a Sharp mini mill here where I work. I am trying to input a program using a lap top computer. The machine does not have a floppy drive to use that I guess is the normal thing. I do have the computer hooked up and it will send a program to the machine and actually downloads it into the memory. I want to run the program from the computer. I hope someone can help me with this!!    |
|
#2
02-27-2008, 02:56 PM
| ||||
| ||||
| Not sure of your question? Do you want to run the machine from the PC? What type of controller is it, or it a PC based control? Doesn't that have a Fanuc controller? Al.
__________________ “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#5
02-27-2008, 03:50 PM
| ||||
| ||||
| If it is a Fanuc, on most you have to enable a PMC bit in the ladder, via a panel switch if the option is wired in by the MTB. Al.
__________________ “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
| Sponsored Links |
| |
|
#7
02-28-2008, 11:49 AM
| |||
| |||
| Problem solved Thank you gentlemen for the input about my problem with the Sharp SV-2412! I spent most of yesterday searching the net and discovered that I needed some more software. I downloaded a trial version of Dostec DNC. I did have some troubles setting everything up, but the the tech folks at Dostek are great and got me running in about an hour! Thanks again, Terri |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sharp CNC V 2412 Question | pshsguy18 | Sharp CNC | 21 | 01-22-2010 10:15 PM |
| Sharp SV- 2412 CNC Machine Question | pshsguy18 | General Metal Working Machines | 3 | 02-16-2008 12:35 AM |
| Sharp SV-2412 | Larry B. | CNC Machining Centers | 18 | 10-12-2007 09:58 AM |
| Sharp 2412 tool changing problem | longcut | CNC Machining Centers | 1 | 09-15-2007 06:02 AM |
| Postprocessor for Faunc Oi Mate-MB on Sharp 2412 | Mickey_D | SprutCAM | 2 | 07-21-2007 06:51 AM |
| | |
Linear Mode
