| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Sharp CNC Discuss Sharp CNC Machines Here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-05-2011, 04:26 AM
| |||
| |||
Hi, The magazine can change tool from T1 to T2, but not from T2 to T1 or to any other position that requires carousel backward movement The spindle put the tool back in the carousel and wait for carousel to rotate, which will never happen, and alarm triggered ( 2027 : magazine not on basic position)  |
|
#2
05-05-2011, 07:07 PM
| |||
| |||
| Check your circuit breakers KM3 and KM4. If they are ok, next check the status of your outputs Y5.4 and Y5.5 in the diagnostic screen when you command the magazine to move in either direction. Could also be a bad relay (KA4 or KA5) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DMG 835V tool magazine | craigsery | Deckel, Maho, Aciera, Abene Mills | 0 | 04-08-2011 07:07 AM |
| Need Help!- Mazak VTC 41M Zero Tool Magazine | cuttingcnc | Mazak, Mitsubishi, Mazatrol | 0 | 12-06-2010 04:27 PM |
| How to restore tool magazine on Meldas? | smirob | Mazak, Mitsubishi, Mazatrol | 0 | 06-06-2010 03:54 PM |
| Need Help!- the magazine don't rotary when to change tool | Vu Tri Nhat | Servo Drives | 2 | 11-30-2008 03:07 AM |
| Random tool magazine to initial state? | padobranac | Fanuc | 7 | 10-03-2008 02:11 PM |
| | |
Linear Mode
