Having Problems when Z axis is referencing home


Results 1 to 2 of 2

Thread: Having Problems when Z axis is referencing home

  1. #1
    Registered
    Join Date
    Jan 2015
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Having Problems when Z axis is referencing home

    I have a sharp 2007 2412 super mill mill, I'm been have a little issue with the Z axis not repeating when I shut the machine down over night. My tool heights I took the night before and when I start running the next day are off .100 of an inch in Z. Has anyone had this issue before? It started doing this I have no clue what could cause this.


    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2014
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default Re: Having Problems when Z axis is referencing home

    the encoder is an absolute type, so I would say the problem is with mechanical parts, like loose gib or something.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Having Problems when Z axis is referencing  home

Having Problems when Z axis is referencing  home