Need Help!- Servo drive GME-system

[Jan-Willem]

I'm looking for more information on the servo drive's that are in an Abene milling machine. I believe it is an abene VHF 3.

The servo drive is:
GME-system AB
Type PWE 11010 T

Does anyone have an electrical drawing of the servo drive?

The only thing I have is the electrical drawing of the Abene machine.

The servo drive gave some fireworks.
I've tried to repair it but i don't have enough information.
I'd like to know more about it.
Who can help me?

Thank you.

[tecno]

Hello Jan-Willem

Are you sure it is 11010 ?

I have jut bought an old Combi Mill that has GME servo drivers but they also have another marking that is
PWE
6010
11010

I have a busted Sinumerik 3 so I am in the hope of getting Servos working with Mach3 with some adapter boards from step/dir to ±10V.

I will be looking for schematics over here in Sweden and let you know if I get lucky and find schematics.

Cheers
Bengt

[Jan-Willem]

Hey Tecno,

Thanks for your reply.
6010 is on the print, I believe? I have to look.

Hope to hear/read from you !

[Jan-Willem]

After trying a few times I finally repaired the drive.

But after a half year I had again problems with the drive.

I've replaced it with a drive from advanced motion controls.

Works OK now.