| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Servo Motors and Drives Discuss servo motors, drivers and other related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-15-2010, 05:09 PM
| |||
| |||
I'm adding a fourth axis to my machine. The current three axes are run by 120V servos. Where can I buy a 120V servo, preferably on a NEMA23 frane? Thank you.  |
|
#2
01-15-2010, 05:54 PM
| ||||
| ||||
| AC sinusoidal? DCBL? DC brushed? There are many options out there. Aerotech, CMC, Parker, Reliance Electric. What controller? are you using intelligent drives or non-intelligent? Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
#3
01-15-2010, 06:06 PM
| |||
| |||
| DC brushed. It'll be driven by a Gecko 320X. I don't know what brand/model the BOB is... I could not find anything useful silkscreened on to it. The rest of the motors are Reliance Electric M100s but I'm sort of brand agnostic... as long as it will reliably and accurately turn the table I don't much care who makes it. I assume that it needs to be 120v like the rest of the motors. |
|
#4
01-15-2010, 08:37 PM
| |||
| |||
| Whats your power supply voltage? G320X is 80V maximum. Keling has some nema23's + encoders. Or there is lots of stuff on ebay (even an M100, but its untested and has a tach). You might want to look into torque/speed requirements though. |
|
| Tags |
| servo |
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 3 axis CNC Servo Controller with servo motors--$700 | CuttersCov | EBAY ADS | 0 | 07-23-2009 11:49 AM |
| Just IN- Provide controllers,drives,servo motors,stepper motors，electronic parts from China | Ling | Product Announcements & Manufacturer News | 2 | 07-12-2009 04:10 AM |
| Galil Motion Controller, with NEMA 23 Servo Motors, Servo Drive, Encoders, Etc. | qualitymachine | EBAY ADS | 0 | 06-01-2009 02:26 PM |
| Pluto Servo - Motors won't servo correctly???? | TZak | LinuxCNC (formerly EMC2) | 2 | 01-10-2008 02:34 PM |
| stepper motors or servo motors? | jprobst | Torchmate | 3 | 07-13-2007 05:37 PM |
| | |
Linear Mode
