Problem Yaskawa servo motor - CNCzone.com-The Largest Machinist Community on the net!

PaulRP · #1 12-22-2009, 09:53 AM

Any ideas if its possible to source a USAGED-09AS1 servo motor. I need a replacement as mine is toast, encoder aswell. Thanks in advance.

mactec54 · #2 12-22-2009, 11:34 AM

Hi PaulRP
You could try these people for your motor, if you can change the shaft to a straight shaft instead of the taper shaft it may be easyer to get a motor that will do the job

http://www.lektronix.net/search/+/ya...ories/+/30/15/

http://www.euautomation.com/search.php?q=&em=3084&p=9

Both of these companys have your motor listed

PaulRP · #3 12-22-2009, 01:41 PM

Many thanks mactec54. Have already tried Lektronix. None in stock and they can'nt source spares for encoder. I have sent an enquiry to euautomation. Thanks again.

sarfrazahmed9 · #4 12-23-2009, 03:44 AM

Hi PaulRp!

Could you please tell me the USAGED-09AS1 motor's servo drive model number may be i can arrange for you.?

PaulRP · #5 12-23-2009, 05:24 AM

The motor is on its way back from Lektronix. As soon as it arrives I will get the number and send it to you. Many thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem- YASKAWA USAGED-09AS1 SERVO MOTOR	PaulRP	Servo Motors and Drives	1	12-10-2009 08:57 AM
Yaskawa SGDH and SGDA servo motor/drive wiring questions	rpseguin	Servo Motors and Drives	62	12-02-2009 06:43 AM
Need Help!- WANTED:DC SERVO MOTOR YASKAWA	torro	Mori lathes	6	03-22-2009 05:05 PM
Yaskawa Encoder-DC Servo Motor trouble	nlh	Servo Motors and Drives	2	11-28-2006 08:58 AM
Yaskawa AC Servo	HillBilly	Servo Motors and Drives	3	10-13-2005 08:21 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)