11-07-2009, 05:09 PM
|
| | | Join Date: Nov 2009 Location: Belgium
Posts: 6
| |
As from the other thread about the factory clean up,the owner, a friend of the family is still running a ISAC SAB9500 CNC for a diamond wire granite cutter , the manufacturer has gone bankrupt a long time ago (michelleti) and there are no manuals.I'm not as much intrested in the CNC software as such , but more in the shematics of the machine ...reason...
I had a quick look inside and got 'very' scared as the 'heart' of the machine runs from a 486 pc...with some very (at least to me) exotic ISA boards with cables running tough the main cabinet...
I tought I' might ask , since asking doesn't hurt :-).
regards,
Luc |
Linear Mode
