Need Help!- Gecko G540

[rotger]

Hello,

I Want to purchase the G540 Drive, but i have some questions:


1) Can i use this motor with the G540?
Stepp ang. - 1,8º

Tensão 5.88V / phase

Nº Phase - 2

Resistência - 1.68 OHMS / phase

Corrente - 3.5 A / phase (the vendor tell me to use 2.5A in Bipolar mode)

Inductance - 5.24 mH/phase <<<<<<<<<<<

Isolation Class - B

Holding Torque MÁX (bipolar) - 32 Kfg.cm

Inércia do Rotor - 1.05 KG.cm²

Temperatura - 80ºC

Wires - 6


2) I have a 48 VDC - 7.3 A Power Supply - Is It enough to this motor? I will use 4 motors.

Data Sheet Motor http://www.motores.akiyama.com.br/pd...HY5.88-1.8.pdf