| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Servo Motors and Drives Discuss servo motors, drivers and other related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-21-2009, 12:01 PM
| |||
| |||
I posted this mistakenly in the General section, so I'm reposting here. I'm working on a Toyoda HMC with a pair of Sany Denki drives for the magazine and the ATC arm. The one for the magazine has come up with a warning that states "the ON/OFF cycles in the Non-Volatile Memory have reached a 4000 cycle limit, replace the drive, and you will now have another 10,000 cycles as a limit". As silly as it sounds, replacing the drive does work, but I'm thinking there may be a way to replace the memory and save this other drive. It's alot cheaper than replcing the drive at $3000! Does anyone have any ideas as to what form this memory appears as on the board? Thanks in advance, Rick.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sanyo Denki Drive | RAC | General CNC (Mill and Lathe) Control Software (NC) | 0 | 03-21-2009 11:09 AM |
| Sanyo Denki Drive Problem | cncdiag | Servo Motors and Drives | 0 | 06-03-2008 11:12 AM |
| Need help with Sanyo Denki stepper | vova | Stepper Motors and Drives | 3 | 05-20-2008 11:16 AM |
| Sanyo Denki BL Super | corydoras | Servo Motors and Drives | 3 | 01-31-2008 05:41 PM |
| Sanyo Denki Help | Gary D | Stepper Motors and Drives | 0 | 04-06-2007 08:17 AM |
| | |
Linear Mode
