Need Help!- Geckodrive G320 and KL23 motors from Keling Technology

[davidbue]

Hi everybody.

I've already built my first CNC mill using stepper motors. For my next project I wanted to use geckodrives + DC motors so I bought some G320 drives and some KL23 DC motors from Kelinginc.com

Now, here's my question:

In the G320 drive manual I'm told to connect motor + and motor - to the terminals "Arm +" and "Arm -". That's good enough, but my motors have 3 wires. Green (Ground), White (+), Black (Common).

What do I do?

I've been searching the forum but I can't seem to find the issure addressed elsewhere.

[Mariss Freimanis]

The green wire connects to the motor frame but verify that with an Ohmmeter. If it does, return that green wire to the G320 SUPPLY GROUND (terminal 1). If you feel really lazy, do nothing with it at all; things will still work.

Mariss

[Kelinginc]

Originally Posted by davidbue Hi everybody. I've already built my first CNC mill using stepper motors. For my next project I wanted to use geckodrives + DC motors so I bought some G320 drives and some KL23 DC motors from Kelinginc.com Now, here's my question: In the G320 drive manual I'm told to connect motor + and motor - to the terminals "Arm +" and "Arm -". That's good enough, but my motors have 3 wires. Green (Ground), White (+), Black (Common). What do I do? I've been searching the forum but I can't seem to find the issure addressed elsewhere.

Hi Sir

Pls check the G320 wiring Diagram with our Servo motor

http://www.kelinginc.net/KelingProductsDocuments.html