Servo motor

[goranmax]

Hi all

I hope you can help me.

I have 9 of those servo motors that I got really cheap.
I wanted to use the motors for a CNC machine that I'm building.

Can anyone tell me how strong the motors are:
this is the info I got:
motor J6 C1 4W 400Hz
MEZ NACHOD CSSR
Motor nr.: 172111
J6C7
4W S1
400Hz UE 24V Ust 24 V
Ue 24 V
0.2 A
Ua 2.5 mV/ Umdr.
400Hz

http://www.elida.cz/cze/elida/script...Kod=0198800263

If I know the correct strength of the motors, I can buy the right drivers.
Or if someone know witch driver I need, would be great


thank you all for the help

GC

[Al_The_Man]

They appear to be 115v 400hz which is mostly used in the aircraft industry.
If they have a strong indent feel when turning the shaft by hand, these could be AC steppers (synchronous) motors.
Either way they do not appear to be suitable for servo application, just looking at the available spec.
Al.

[goranmax]

thank you for the info.

the 115V was on the website that I saw.
but on the Moter it is 24V

sorry for that

[Mariss Freimanis]

The motor is rated at 4 Watts. 4 Watts is too small to do anything useful in CNC.

Mariss