| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Servo Motors and Drives Discuss servo motors, drivers and other related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-06-2008, 12:11 PM
| |||
| |||
Hello, Does anybody have already used the limit switches input E3 and E4 on an old Parker SV-M drive? I try with P36=6. If E4=0 or E3=0, the motor stops and brake is released. The drive displays an error E51 or E50. Then, it's written in the manual that the solution to this error is to change the polarity of the analog speed input. I've done that, but it's impossible to quit the error by toggling E1 input after reversing the polarity? What do I wrong? Link to manual is : http://www.parker.com/literature/Lit...n/SVUG5_98.pdf Thank you. Last edited by toninlg; 08-06-2008 at 01:24 PM.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Limit switches and homing switches | AeroKam | Open Source CNC Machine Designs | 16 | 01-05-2008 07:56 AM |
| Limit switches,again | SPEEDRE | Mach Software (ArtSoft software) | 7 | 12-26-2005 10:56 PM |
| The relationship of limit switches to home switches. | MikeAber | General Electronics Discussion | 4 | 11-04-2004 01:28 PM |
| Limit switches and home switches | viktorcnc | TurboCNC | 2 | 08-03-2004 06:11 AM |
| Home switches and limit switches. | ynneb | General Electronics Discussion | 5 | 04-08-2004 05:32 PM |
| | |
Linear Mode
