Toshiba Servo Motor Help

[will_lewis]

I have a Toshiba servo motor MFA350MBWNEB with a Tamagawa FA Coder TS5781N3B. The machine it came off was a BMC 800 and it is the B axis. I am wondering if anyone out there may have any information about the pin out of the encoder and any of the particular motor specs? I attempted to contact Toshiba about this but didn't have any luck with them. Any help from anyone would be greatly appreciated. Thank you

[TOSNUCGUY]

Hi,
The motor specs should be listed on the motor. Other specs are available from the machine 9000 parameters. As for the encoder, it has A,A*, B,B*, Z,Z*, + connections for serial absolute feedback information. The encoder has a proprietary part # which belongs to Toshiba. (Tamagawa told me!)
So what do you want to do with the motor? If it came from a machine, chances are something is wrong. If you want to get rid of it, let me know.

regards.

[bbrreid]

Hi I have some drive boards from a Shibaura vmc also other circuit boards and some transistors 2SD646A FROM THE SPINDLE DRIVES and old manuals. I dodnt have the machine anymore but it was hooked up to a 4th axis on a 520 control