Fuji DSR Compact Drive adjustment

[stude8]

We have a number of Hitachi Seiki VA-40's. They all have Fuji spindle drives. My question is can anyone tell me or is documentation available to tell what the various pots do, labeled with "vr" numbers, on the separate HAH board on the front of the drive. On one machine I'd like to adjust the spindle from oscillating forward and reverse during a M19 command.
Thanks

[smts]

Try giving Laeo a call at OESS in Chicago 847-233-9412, he is very knowledgeable and knows these drives good luck

[PG Siebert]

Originally Posted by stude8 We have a number of Hitachi Seiki VA-40's. They all have Fuji spindle drives. My question is can anyone tell me or is documentation available to tell what the various pots do, labeled with "vr" numbers, on the separate HAH board on the front of the drive. On one machine I'd like to adjust the spindle from oscillating forward and reverse during a M19 command. Thanks

Hi stude8, did you manage to find any documentation on the DSR Compact? I am looking for the same.

[spike696969]

Hi, I have a couple of manuals as far as the drive goes.

Email me to send you a PDF copy.


cnc@xactmachining.com

[SINUMERIKO]

spike696969,

I've sent you my email address, hope you are still able to provide me a copy of that manual as well.

Thanks.

[vasanthlathes]

Originally Posted by spike696969 Hi, I have a couple of manuals as far as the drive goes. Email me to send you a PDF copy. cnc@xactmachining.com

Hello, I am Vasantha from Sri Lanka.

Can you please email me a PDF etc copy of the DSR Compact drive used on an Ikegai FX20N Lathe which I have retrofitted with an Ajaxcnc Lathe Kit . Every thing works fine and now I am at the stuck point of what to do for the spindle drive. I can use ther existing DC drive but do not know how the connections are. I can use a standard Inverter and an AC drive but prefer to use the existing eqpt. Please help.

regards
Vasantha.

[abid iqbal]

Originally Posted by spike696969 Hi, I have a couple of manuals as far as the drive goes. Email me to send you a PDF copy. cnc@xactmachining.com

hello
i am new in this forum my machine hitachi seiki va 40 spindle drive is not in working please send me pdf manuals of spindle drive.

my email id=abid_iqbal2008@yahoo.com
regards
abid

[Nazario]

hello
I have a problem with the same drive.
Please send me PDF manual of spindle drive.
my email is nazario.skr@gmail.com

[develop1]

Hello

I have a problem with FUJI ELECTRIC DSR COMPACT FSD-11DN23 drive.
Please send me PDF manual of this drive or some information that can help me, the other DSR COMPACT models may also can help.
My drive trouble is the drive was not run and no responds in any commands M03/M04
I also do basic checked it.

my email is anusorn_mxy@hotmail.com

Thank you.

Originally Posted by spike696969 Hi, I have a couple of manuals as far as the drive goes. Email me to send you a PDF copy. cnc@xactmachining.com

[usefi5961]

dear all:
i need information and manual for freg10e field regulator for fsd22dn35 dc spindel drive and i need datasheet for exvde21 hybrid ic.my mail is usefi5961@yahoo.com