LinkBack URL
About LinkBacksi have a complete yaskawa servo amp and motor setup for 4 axis with all wiring complete accept i dont know what i need to hook it to my computer to run it with mach 3 mill someone please help me !
i have a complete yaskawa servo amp and motor setup for 4 axis with all wiring complete accept i dont know what i need to hook it to my computer to run it with mach 3 mill someone please help me !
Does it accept step/direction signals? If not, you'll probably need something like the Pixie.
http://www.skyko.com/products/
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
not sure about that i have the models . i have 1 sgdb-10adg and 3 sdga-02bs . its like a different language i work with steppers and i understand how to hook up the power to the servo amps but after that i dont know
Posting Permissions
