Results 1 to 7 of 7

Thread: Delta Tau PMAC-Lite

  1. #1
    Registered
    Join Date
    Jan 2007
    Location
    US
    Posts
    432
    Downloads
    0
    Uploads
    0

    Delta Tau PMAC-Lite

    I recently purchased an adic robotic tape library for parts. In the controlling PC was a Delta Tau PMAC-Lite controller. It's part number 602402-101. It's an ISA board. From looking at the Delta Tau web site it appears to be a 4 axis servo controller board. Is this board worth anything?


  2. #2
    Registered
    Join Date
    Oct 2005
    Location
    USA
    Posts
    104
    Downloads
    0
    Uploads
    0
    If is a PMAC Lite about $200 on ebay.


  3. #3
    Registered
    Join Date
    Jan 2007
    Location
    US
    Posts
    432
    Downloads
    0
    Uploads
    0
    Yep, that's what it is. PMAC Lite. I just listed it on eBay for $10. We'll see what happens.


  4. #4
    Registered
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Delta Tau

    Hi,
    Do you still have this delta tau 602402-101 board?
    lawauto@aol.com
    Thanks,Lou


  • #5
    Registered
    Join Date
    Sep 2010
    Location
    usa
    Posts
    1,104
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by TravisR100 View Post
    Yep, that's what it is. PMAC Lite. I just listed it on eBay for $10. We'll see what happens.
    i dont see it - post link?
    Mike (at) KilroyWasHere (dot) com -- servo/spindle/vfd motors/drives/controls sales/service/repair/retrofit


  • #6
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    18,939
    Downloads
    0
    Uploads
    0
    5yr old post maybe why?
    Al.
    CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  • #7
    Registered
    Join Date
    Sep 2010
    Location
    usa
    Posts
    1,104
    Downloads
    0
    Uploads
    0

    Red face

    oops
    Mike (at) KilroyWasHere (dot) com -- servo/spindle/vfd motors/drives/controls sales/service/repair/retrofit


  • Posting Permissions


     


    About CNCzone.com

      We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

    Follow us on

    Facebook Dribbble RSS Feed


    Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.