| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Servo Motors and Drives Discuss servo motors, drivers and other related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-01-2007, 10:51 AM
| ||||
| ||||
I have a Miyano BNC-34 with a bad "Z" axis servo motor. I sent it out to a motor shop and they said it is not repairable. The control is a Fanuc 3T. Also, I am not familiar with downloading parameters. Any help would be greatly appreaciated !!!!  |
|
#2
01-01-2007, 10:57 AM
| ||||
| ||||
| Probabally your best bet is Ebay, I assume it is a DC servo? Either Fanuc or Gettys of similar size will usually work just as well in a pinch. The 3T parameter list is not that long, If you have them recorded, it does not take that long to enter by hand. Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
#4
01-01-2007, 11:29 PM
| ||||
| ||||
|
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
#5
01-02-2007, 11:40 AM
| |||
| |||
| www.fanuc.net they have rebuilt parts. |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
