Hall encoders

[danSN]

Hi,

I have a contorller that do not have any inputs for the Hall sensors.
In the same time the motor has the normal outputs A B C and 3 for the halls.

As expected the drive "complains" that can't read the encoder

I believe that the Hall signals are overlaped with the ABC impulses.

Anybody knows about any converter or solution to make this work?

Thank you,

Dan

[Al_The_Man]

If I read you right, you have a drive that does not have hall inputs and you are trying to mate it to a motor that does?
What is the drive type you have? As obviously it does not sound like a BLDC drive.
Usually the 'Hall' tracks are completely separate.
Al.

[danSN]

Hi,

Looks like Yashawa has this kind of drives and encoders. (motors with no halls). Motors are cheaper and hall are sensitive to vibration.

Dan