| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Servo Motors and Drives Discuss servo motors, drivers and other related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-17-2006, 05:15 PM
| |||
| |||
hi. i have a mitsu M-RH40AN servo drive and a mitsu HC-MF43 motor. reading in the manuals i dont see how to make the encoder cable for this motor beacause the motor have two pairs of signal MR,MRR and MD,MDR And the connector of the servodrive only have input for MR,MRR. The cuestion is MD,MDR are not used? if i conect only MR,MRR the driver go in A16 alarm (encoder disconected,miswired or cable short) any sugestion? Tks. Josep in Barcelona spain  |
|
#2
10-17-2006, 06:48 PM
| ||||
| ||||
| I would guess that the MD & MDR are the common for the other two. I will look in my Mits servo manual and see if they show them. Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
