| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Servo Motors and Drives Discuss servo motors, drivers and other related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-10-2006, 01:18 PM
| ||||
| ||||
What type of feedback do okuma vac-motors have, resolver or encoder/hall? Model: VAC-MFL 7.5 / 5.5R-157, not much info on the net about them. I want to use it as a spindle drive. Thanks
__________________ Dennis  |
|
#2
10-03-2006, 10:08 PM
| |||
| |||
The Vac motor has a resolver in the back behind the fan/blower. The drive on the okuma also use a magnetic encoder which is usually placed on the main spindle shaft and it is used by the drive for positioning and velocity control. Brandt |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
