Fanuc 15 M Ram Parity Error(system Lable Lost)

[SBAGHAEI]

I have a problem with fanuc 15 m ram parity error and this is when i 'm going to clear all files ,i asked for 3 8 digit number and i just enter them and push input but no function

[ljmapet01]

Hello
You need to go to system options same as on 16 or 10 control and create new system label and etc. Make sure you have your 900 or 9000 if I remeber right if you have them in binary need to convert them to hex and from this service manu that would be first options you input. If you need more help with key combinations etc. post me a message I will gladly help. Luke