| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Servo Motors and Drives Discuss servo motors, drivers and other related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-18-2006, 07:01 AM
| |||
| |||
hello, i am wondering if there any circuit or IC that i can connect to a normal dc motor to convert it to servo like futuba and the ones used in robotics ? not like encode type servo. i will appricate your help very much max  |
|
#2
08-18-2006, 06:56 PM
| |||
| |||
| Try the NE544 IC that was supplied by Signetics/Phillips/Ideal Semiconductor. This was used for years to make R/C servos. Real easy to use. Another was Mitsubishi M51660L. Novak and Futaba used it their ESC's and servos. New Japan Radio also sold a servo IC (NJM2611) Digikey distributed their line at one time. The ZN409 or ZN419 servo IC was als sold at one time. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
