I need NEMA 23C FRAME info

[Smertrios]

I purchased a servo system from a seller on eBay and want to find a source for bolt patterns and thread size on 23C motors.
http://cgi.ebay.com/CNC-router-contr...QQcmdZViewItem

[fkaCarel]

If I google Nema 23c I get loads of information.

Carel

[Smertrios]

I get a load of info as well... be nice if all those references to 23C were to bolt patterns and thread sizes.

[fkaCarel]

first google page and search logically: http://www.linengineering.com/site/p...htm#Dimensions

Carel

[Smertrios]

"Silverpak 23C" is a model number the hole pattern they show is not a "NEMA 23C". Look at the link in the first post the motors appear to have 6 holes.

[unterhaus]

those motors do not meet the nema 23 standard. I have seen other people say that they are nema 23 form factor. Nema 23 has a square hole pattern.

The hole pattern is around somewhere, maybe the first place is to ask the person that sold them to you.

[id 10 t]

Should be in here
http://www.polysci.com/docs/moc23series.PDF
Colin

[NC Cams]

Memo to UNTERHAUS:

Your reply in paragraph 2 made ENTIRELY too much sense.... I oftern wonder in amazement why people buy stuff from a seller on E-bay and then go every where else for information about the very same item....

Memo to ID 10 T:

For future reference, please tell the world HOW DID YOU LOCATE THAT LINK????

(tic) must have been REALLY hard to do, I"ll bet???

[Smertrios]

Originally Posted by NC Cams Memo to UNTERHAUS: Your reply in paragraph 2 made ENTIRELY too much sense.... I oftern wonder in amazement why people buy stuff from a seller on E-bay and then go every where else for information about the very same item.... Memo to ID 10 T: For future reference, please tell the world HOW DID YOU LOCATE THAT LINK???? (tic) must have been REALLY hard to do, I"ll bet???

nobody knows...

[Smertrios]

I believe and still do that "NEMA 23" and "NEMA 23C" are NOT the same thing... that reference to "NEMA 23C" google search was for the regular "NEMA 23"

[Smertrios]

I really was not looking for information specific about those motors either just information about them like maybe a chart. In my handbook there are "C" frame motors listed but the chart starts at a size bigger than 23... anyway your post is a rant IMO

[NC Cams]

Hardly a rant.

Merely a tongue in cheek expression of frustration with what appears to have been an inefficient and/or incomplete search effort and here's proof:

Googled "NEMA 23" (and NOT 23C) and the VERY FIRST link that came up was:

http://www.applied-motion.com/produc...ors/nema23.php

Exactly what you're looking for is there as DWG's, DXF's and PDF's there as well as the GIF's or JPG's that the site provided via download....

A bit more searching found this reference to NEMA 23C:

http://www.clrwtr.com/Accu-Coder-755...a-Encoders.pdf



Enjoy