Will this brushless servo/drive/MP1000-THC combo work?

[wolfmetalfab]

Ok, first off I am new to this CNC stuff, have done alittle home work and think I have the combo of stuff I want to use, I am still in the lay out phase of things and trying to get a idea of what I'm going to need and $$ amounts, but mostly looking for feed back if this combo of stuff will all work together

The machine I want to build is a 5 foot x 10 foot CNC plasma w/gantry... BUT...
as I said I'm new to this CNC stuff so I dont want to build a big unit off the start so the plan is to build a 2 foot x 3 foot work area gantry router/engraver

2'x3' gantry router
Parts (will this work together?)
Parker servo motor DC, SM231-AE-NGSV x3 Specs Link
MP-1000 THC Specs
Rutex R992H driver Specs

Software will be Mach3
If anyone knows if this combo of parts will work together it would be great

[wolfmetalfab]

And still no idea if this would work....

[DennisCNC]

The parts will work together fine just it might take you a while to get the DC brushless motors working with the drive as there are a bit of setting that need to be dead on. One thing I think might be a problem is brushless motors around a plasma cutter and all its electrical noise. I know comercial units run brushless motors but I think they spent a lot of time on R&D to make it work nice. Maybe a DC brush motor system will be easyer to start with.

[vacpress]

9 months went by between his posts. long time to wonder something like that...

interesting...