I got Pixie'd today

[Stevie]

No i did not walk into the wrong kind of Bar

I tested 1 of KTP's Pixie Step-Direction boards with a Copley amp and a servo
WOW; works great; i just finished a product review also on this subject
It will be public once the Admin looks it over
If you've been looking for a good step-direction board for conversion of a stepper system to servos; you can't go wrong; hey if it can run a huge P5 and my little Copley/MCG 110oz/in I bet it can run anything

Plus if my dumb a** can get it to work; anyone can

[jskrebs]

Which Copley amp and servo?

[Stevie]

503 Copley Brushless 5amp run 10amp peak
Motor is a MCG 23006110oz/in 330oz/in peak with 1000 line encoder

I just finished testing all 3 amps; with the same wiring config; works great with all of them
I have submitted a wiring diagram to KTP for his records for others that might want this config

Also look for the product review i posted; some interesting stuff on the Copley
I found

[jskrebs]

I am looking at the copley acelnet line for a project I am working on.

[cncclay]

HI, Copley CCC Controls BWM Servo Amplifier / Controler 513. WOULD THIS AMP WORK?
Manufacturer: Torque Systems servos
Part Number: BNR3312APGOOHSOOO8 servos

[unterhaus]

Just thought I would post a link to your review. Review

I have some copelys, amc and others that could use one of these. Maybe I should buy a case.

[cncclay]

HI, Could someone tell me if MCG ( BMC 6C ) PWM servo amp would work with the above set also??
Thanks Clay

[Stevie]

can you post the link to the ebay item
It might just work

Steve

[cncclay]

http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT
Hi, Hope this link works.

[Stevie]

not sure bud
I see no hall input; but it's not the best pic

But I do see Torque input; thats what the pixie gives; encoder wires to the pixie

[cncclay]

HI, Yes all are different. I have a pdf file off the net. it has one pin marked +V HALL, THREE marked COMM A,B, AND C. Do you think it will work ???
THANKS Clay

[Stevie]

better get Rick involved
rick@skyko.com
He'll know