Which sinusoidal drive with this AC servo?

[walter]

If you had the budget, which one would you go with? No need to drive motor at full specs(too expensive $$). More like 70% or so. The machine weight and size similar to Bridgeport. Step and dir input.

Motor spec:

* Rated Output 1000 Watt
* Voltage 100 VAC
* 3 Phase
* Nameplate Amp rating 9.6
* RPM 3000
* 24 Volt DC brake
* Cont. stall torque 3.2 Nm (28.5 lb-in.)
* Peak stall torque 8.8 Nm (78.0 lb-in.)
* Cont. stall current 13.7 Amps
* Peak stall current 34.0 Amps

Yes, it`s the famous Sanyo P5

Thanks

[walter]

Does anyone have access to Copley servo amps pricing list? I`m interested in Copley Xenus family drives --> http://www.copleycontrols.com/motion...Digital/Xenus/


Help will be appreciated
thanks

[vmax549]

Walter you can also look at SERVO DYNAMICS and their 94s Series of drives. You can contact them at:

Mike McWilliams, VP
Servo Dynamics
21541 Nordhoff St.
Chatsworth, CA 91311
Cell: 818.590.9712
www.servodynamics.com

Tell Mike Terry Parker sent you. TP

[walter]

I will. Thanks for the link!

[Stevie]

Originally Posted by walter Does anyone have access to Copley servo amps pricing list? I`m interested in Copley Xenus family drives --> http://www.copleycontrols.com/motion...Digital/Xenus/ Help will be appreciated thanks

http://www.clickautomation.com/produ...d=1633&cid=257
$445 for this one
The accelus range has step and direction