| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Servo Motors and Drives Discuss servo motors, drivers and other related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-01-2011, 10:58 PM
| |||
| |||
What are the complete accessories of DC Servo motor. E.g DC servo motor, Encoder.........???? what else i need to make it operational.  |
|
#2
12-02-2011, 03:12 AM
| |||
| |||
| You need also a breakout-board (with optokopplers) and a driver untit for the motor. Thats it. |
|
#3
12-02-2011, 10:44 AM
| ||||
| ||||
| You also need an appropriate power supply if it is not built into the drive. Typically for a separate DC supply, the voltage should be at least 10% above the rated motor voltage. The drive should accommodate the type of command signal, e.g. step/dir, ±10vdc analogue etc. Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| couple of sets of Indramat Servo Controller+Mains filter+Servo Motor 9Nm, 4500rpm | bogus105 | EBAY ADS | 2 | 11-16-2011 10:25 PM |
| Complete Allen-Bradley CNC Drive and Servo Motor system | CNCadmin | EBAY ADS | 0 | 05-13-2011 03:20 PM |
| Complete Allen-Bradley CNC Drive and Servo Motor system | CNCadmin | EBAY ADS | 0 | 05-04-2011 10:30 AM |
| Complete Allen-Bradley CNC Drive and Servo Motor system | CNCadmin | EBAY ADS | 0 | 04-02-2011 01:10 PM |
| Equivalent servo system of step motor | bunalmis | Servo Motors and Drives | 4 | 11-22-2006 05:33 PM |
| | |
Linear Mode
