| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Servo Motors and Drives Discuss servo motors, drivers and other related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
10-03-2005, 04:49 PM
| ||||
| ||||
The guys at CMC Cleveland Machine Control came threw Took a little wile to get a hold of the right guy But then he sent me a sheet with all the motor specs And another that has the dimensions and pinouts and signals and tolerances it seems the motor is 11 amp dc const 37.2 amp dc peak 66.5 voltage const I looked at the Rutex drives but it looks like the brushless one may be a little low on amps only 20 Possibly this is not a problem I will give them a call Anyone recommends any drives that will work for these Thanks Just let me know if you need any more info I put a image in my gallery but not shure how readable it is http://www.cnczone.com/gallery/data/500/spec.jpg Hoping to bolt one on soon and upload some more pictures of my progress Est 2 to 3 weeks Last edited by eat; 10-11-2005 at 11:09 PM. Reason: good news  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Hooray got motor spec sheet 
Linear Mode
