LinkBack URL
About LinkBacks
Send a PM to homecnc. I believe he bought a bunch, added encoders and is selling them ready to run for about $100 each. He also has some bigger ones for around $150
| | |
Since the Clifton DC Motors are sold out my cheap servo dream is gone right? There are no other cheap Brand new servos around are there?
Send a PM to homecnc. I believe he bought a bunch, added encoders and is selling them ready to run for about $100 each. He also has some bigger ones for around $150
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
i've got some servo motors with no encoders that i would let go. i need to look at the specs again but they run on 24VDC and are reversible. email me at
jczub at hotmail dot com
and i'll send you some pics and the specs.
Posting Permissions
| | |
