Mitsubishi Electric Automation Inc. - Manuals Search
u can get manual there
I just got Mitsubishi servo motor HA-FE13 but somebody cut off encoder connector(I don't have that connector). Can somebody help me with this problem. I need connector pinout drawing. It's 8 pair of wires.
Hi. I just checked manual for that servo. Nothing was about wires color and that connector. I found a drawing how to make ext. cable.
hmmmmm... I downloaded 10mb Mitsubishi MR-H Servo Manual.pdf manual and page 14 shows wiring for the encoder connector....
Could you post the direct link to that file?
I would but it has been a while. can I just email it to you? If u can rcv a 10mb file pm me and i will email u.
That drawing isn't good. Nothing about HA-FE13. Best think is to has a drawing from somebody who has same servo motor. Just unscrewed the connector and make a picture.
Do you have a separate part number for the encoder?
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
I don't have separate model number just for encoder. I don't know which color of wires from encoder belong to which pin of connector. I don't have that connector. I have 8 pairs of wire.
hold the presses! this one cost me 3 favor call ins!
I got your manual.. my mitsubishi wizard buddy says look at page 115 - all the data you ever wanted on that exact OLD OLD motor/encoder you ever wanted! I now owe HIM! I will email shortly, just got home.
emailing now.... it is 19.6mb size - that ok for your gmail account to receive w/o error?