IDC B8001 servodrive manual request

[toninlg]

Hi,

I have a machine that uses IDC B8001 servodrives. Manual of the drives seems to be lost. Does anybody have a pdf copy of this manual? I have looked at te Kollmorgen website but it's not there; only the "B8961 and B8962 manual" is available.

Thank you very much.

[Matt Adams]

Here's a copy. I used to work for Kollmorgen, I have lots of their documentation and a lot of their obsolete components in stock where I currently work, especially BDS4, BDS5 and Servostar CD drives.

Matt

[toninlg]

Thank you very much for your answer.
It seems that my drive had a tracking error. I had to replace a faulty drive (doesn't power on anymore). Perhaps that the configuration file I have downloaded in the new drive hasn't the good parameters. I'll check it.
The two machines must still last one year before retrofit. I hope that I will have no more problems, because all spare drives I have are defect.

[mike_Kilroy]

Hi Matt. Beat me to the punch sending this Hope all is good with you.

[HotelTango]

Hi all,
I have a fault IDC B8001 servodrive. I want to get the configuration file from the fault one to download into the spare one. Please introduce me the software or send me the link to download this software. Tks.

[mike_Kilroy]

I have the software; there is no link anymore as this product is long obsolete. Post an email address that i can send software to that will accept exe files & size to 12mb and I will email to you.

[HotelTango]

Hi Mike,
My mail is jintai008@gmail.com or tigerfly168@yahoo.com. Thank you so much.

[mike_Kilroy]

emailed to both addresses two emails: one 12mb, other 3mb. not sure which of the 2 programs u want. let us know if they come thru ok. both zip files

[HotelTango]

Hi Mike,
I've received them, I will try connecting to upload the configuration file.
Thank you very much