Electro-Craft Servo M1140 - specifications?

[Stewey]

HI Folks,
I've tried an Electrocraft legacy download, and tried Mr Google, but I haven't yet been able to find any specifications on the M1140 Electrocraft servo.

I was wondering if anyone here might know where I could find the data sheet?

Thanks!

[Stewey]

'Bump'.

Does anyone have any ideas on another source for the answers? The servo is about a 2003 model, from memory-not really that old.

(E'craft themselves didn't reply to the polite email I sent either.)

[Al_The_Man]

I have some older catalogues but nothing of that number shows up.
If it is that recent I would assume it is AC/BLDC, not DC brushed?
You may have to do some reverse engineering to find the spec's, especially if it is an OEM model.
Also Rockwell/Allen Bradley bought them out some years ago.
Al.

[Stewey]

Thanks, Al.
On it is Electro Craft Servo Products #1140-01-008. 29VDC at 4000 rpm, and it has brushes.
I'm more curious about working torque, I-max etc.

Maybe it is/was an OEM issue...

Thanks anyhow for your time.