| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Servo Motors and Drives Discuss servo motors, drivers and other related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-15-2010, 01:35 PM
| |||
| |||
Hei folks... I have a' servodrive from panasonic minas s-series and i ned the com cabel ise it posebil to make it on mey oven and if yes does enyove have the conections.... best kim jessen  |
|
#2
05-21-2010, 08:16 AM
| |||
| |||
I had the same problem. since the RS232 connection uses the 3 pins across the center of the DIN connector, I just used 3 pieces of solid wire (cut off of some resistors). I pushed the wires thru a piece of thin cardboard and them put some epoxy on top of the paper. The din connector has 8 pins. Row of 3 on top, row of 3 in middle and row of 2 on bottom. The middle row are pins 5,4,3 looking at the drive. From left to right. 5 txd, 6 signal ground, 7 receive. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- panasonic driver | manmardam | Servo Motors and Drives | 2 | 02-08-2010 01:21 PM |
| Problem- Panasonic Minas A4 Servo Overload Error | Mert-G | Servo Motors and Drives | 5 | 11-01-2009 10:32 PM |
| Need Help!- How to Reverse Rotation on Panasonic Minas? | parametric.ms | Servo Motors and Drives | 4 | 10-11-2009 08:57 AM |
| new drive for Panasonic Minas S series motors | jmelson | Controller Cards | 14 | 08-09-2009 12:59 PM |
| panasonic motion | LaserToolShop | Servo Motors and Drives | 0 | 08-17-2007 04:18 AM |
| | |
Panasonic minas s seri pc com cabel 
Linear Mode
