need photo PCB Parker GV driver

[gin]

Hello!
I have 3 Parker GV6 controller, but its bad controller for CNC (not have step-dir input), if you have Parker GV controller, i need photo up PCB (may be i can downgrade GV6 to GV).

Thanks and sorry for my bed english.

[gin]

up theme please any body help

[flanny]

I have the same problem you need gv drives not gv6, you can ask by parker if it's possible to downgrade them.
I don't think so, problem is the software(bios of the drive)

[gin]

I have the same problem you need gv drives not gv6, you can ask by parker if it's possible to downgrade them.
I don't think so, problem is the software(bios of the drive)

hm... Im resolv problem connect input +/- 10 V, and write programm.

[flanny]

let me know how you do this

[gin]

ok.
you have in GV6 input to analog signal (+/-10V).
you need converter step-dir to (+/-10V) and write small programm to GV6 (i not remember programm, sorry - but tommorow i can remeber this)

let me know how you do this