PACIFIC SCIENTIFIC PACSCI SC905 DRIVE
Registered
PACIFIC SCIENTIFIC PACSCI SC905 DRIVE
Hello,
Would any one have a schematic for a PAC-SCI 900 series servo drive. Kollmorgen owns this now.
Link to manual http://www.kollmorgen.com/uploadedFi...900_Manual.pdf
When power is applied to the drive, the 7 Segment LED status display is just blank. All three line fuses on the inside test good.
Any advice or information will be deeply appreciated.
Thanks,
Mike Similar Threads:
Member
Re: PACIFIC SCIENTIFIC PACSCI SC905 DRIVE
No schematics out there but some of us Kollmorgen folks repair these and even have spares or can sell u new....
Sent from my SM-G900V using Tapatalk
Member
Re: PACIFIC SCIENTIFIC PACSCI SC905 DRIVE
Probably a little late, but I just fixed one that seemed "dead" because there was nothing on the 7 segment display. I changed the capacitors in the power supply section, and it works good now.
PACIFIC SCIENTIFIC PACSCI SC905 DRIVE
Tags for this Thread
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules