Hi all guys,I'm new to this forum,
after asking the yaskawa without any answer, and after weeks of research, ask you if anyone knows this servo drive model or if it has the right manual to know how to connect to the programming and a pin-out scheme. Thanks in advance
Similar Threads:
Thanks so much mactec54!now I will try to connect with the Sigma Win program,
to make sure they work ..
the idea is to run them with Linux cnc, and heidenhain optical scale with sin / cos to TTL converter ... the dialogue between linuxcnc and sgd servodrive will be on CN1?
Goodmorning everyone!
I'm still in trouble with this servopack !!
after many tests I still can not access the parameters ...
I tried different links with rs232 I tried with an rs422 interface, I tried with SVMON version 2-1 r3 and 35r4 .Sigmawin plus ... I do not know what to do anymore, I always get the answer that the servopack is not found.
And I've tried with both drives I have available .. nothing. what I do? I throw them away? Connector CN1 and CN2 are disconnected.
Hi,
I will not stop trying but I ended up with the idea, my last http://www.cnczone.com/forums/attach...d=378784&stc=1