Need help connecting servos to controller


Results 1 to 1 of 1

Thread: Need help connecting servos to controller

  1. #1
    Member
    Join Date
    Apr 2005
    Location
    USA
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default Need help connecting servos to controller

    I am refitting a 1989 Kitamura with LinuxCNC using Mesa 7I93 and 7I77 cards. I am confused as to connecting up the various servos. Right now I am trying to connect the Spindle servo amp(Sanyo Denki 20BA15offwb4) through the DA converter (SDC-203). The original control received 7 wires form the DA converter to 2 seperate cables. Where do I connect the SDC-203 lines to the 7i77? I have attached wiring diagrams of the parts in question. Thanks for your help.

    SDC-203
    19 CW
    18 PLUS
    17 CCW
    16 SIN

    8 0V
    1 INPOSI
    3 ZERO

    Mesa 7i77
    Encoder
    /INDX0
    INDX0
    +5v
    /QBO
    QBO
    GND
    /QAO
    QAO

    Drive
    Aout0
    GND
    ENA 0+
    ENA 0-

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Need help connecting servos to controller-20170722_220757-jpg   Need help connecting servos to controller-20170722_220844-jpg   Need help connecting servos to controller-20170722_220903-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help connecting servos to controller

Need help connecting servos to controller