Mill Post: MC9 to Mach2...I'm using a Xylotex Board?

[EPM]

Hello,

I am using a Xylotex board to run my MaxNC 15 Mill. I need to know the correct post processor to use in order to convert my MC9 programs into G Code for MACH2. I tried using MPFAN.pst from MC9 and then importing them into Mach2...but the cuts were completely different from what I drew up.

Please give me any help that you can offer...

Thank you,
Tony Elia
EPM
eliapaintball.com

Feel free to email me at tony3039@aol.com.

[DAB_Design]

There is a Mach2.pst that I found somewhere. I believe it was at the Mach2 yahoo group. You can find a link to the yahoo group at www.artofcnc.ca

[EPM]

Thank you...I probably won't find it...so if anyone knows where it is...I would appreciate the help.

[DAB_Design]

you've got mail

[justCNCit]

so you're saying that post processor works well for bridging Mach2 and MC9.1?

[DAB_Design]

so you're saying that post processor works well for bridging Mach2 and MC9.1?

From what I can tell looking at it, it started out as a generic post (probably one included with mastercam). And someone edited it to work well with Mach2.

There are probably several of the post files that come with mastercam that 'would' work (might need some minor changes done).

[H_U_S_S_A_M]

I use CNC TNC 155 heidenhain but what is the best post processor to use ...
I use Mastercam 9 to translate the data but .. I have problem when i trenslate the data , some data are missing so ... what post processor should I use ...

[justCNCit]

I hear mpmillpwr works fine for Mach2 out of MC9.1