Ok, What's the best post processor for Bobcad/cam ver21? Mach 3 post does wierd things and I don't trust it. Anybody?
You can get help in these Forums too.
I really don't know much about Mach2 but if the ISO settings in BobCAD aren't setup properly you will get weird things like crop circles etc.
This is the same with all software including Mastercam, Surfcam, and Catia. You have to read your Machine Control Manual and understand what you need BCC to output from the Post Processor.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)