| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
08-05-2007, 09:31 PM
| ||||
| ||||
You can get help in these Forums too. http://cadcamtrainer.com/forums/index.php http://216.117.147.20/bobcadsupport/forums/ http://cnczone.com/forums/forumdispl...23&daysprune=1 I really don't know much about Mach2 but if the ISO settings in BobCAD aren't setup properly you will get weird things like crop circles etc. This is the same with all software including Mastercam, Surfcam, and Catia. You have to read your Machine Control Manual and understand what you need BCC to output from the Post Processor. Cheers!!!!!! 
__________________ Toby D. "Imagination and Memory are but one thing, but for divers considerations have divers names" Schwarzwald (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) www.refractotech.com    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| BOBCad Post for Boss 5 | darrelp | Tutorials | 1 | 12-13-2007 10:51 PM |
| Running BobCad/Cam and Mach 3 on the same machine? | Corvus corax | BobCad-Cam | 9 | 01-11-2007 10:19 PM |
| Mach2 Post for Bobcad v19 | bpmufx | BobCad-Cam | 9 | 06-07-2006 04:01 PM |
| Bobcad beginners problem in Mach... | adryan | BobCad-Cam | 3 | 09-22-2005 04:33 PM |
| BobCad-Cam V18 post help needed? | Mstcnc | BobCad-Cam | 0 | 10-18-2004 12:37 PM |
| | |
Linear Mode
